Oil Pumps

R500T drum pump has the same performance as the R-SERIES, R500S stub pump range but with the extended suction tube included.

This allows direct from container/drum dispensing into a workshop system possibly feeding multiple dispensing points.
R Series Oil Pump
File Size: 1642 kb
File Type: pdf
Download File
Picture
'R' SERIES OIL PUMP
The MAOP20 All-Purpose 20L Oil Transfer Pump is designed for dispensing most service fluids including engine, gear, transmission, hydraulic and some engine coolants from 20L - 25L drums. An extendable suction tube and two additional bung adaptors ensure that the expanding range of different size and types of drums are easily catered for. Delivery on the down-stoke makes this pump easy to use especially when the drum is low on fluid. An extra-long clear delivery hose gives easy identification of the fluid type and allows better reach into difficult areas.
ps_maop20_ver2.pdf
File Size: 2219 kb
File Type: pdf
Download File
Designed and manufactured in Australia, the BOP20 Pump Stem Pack comes with both the modular pump stem and an on-demand control nozzle with a 1.5m hose. Each Pump Stem has an extendable suction tube for different 20L oil drum lengths and complementary bung adaptors to suit various drum openings.  Multiple pump stems can be used with differing fluids to avoid cross-contamination. To function, the stem is operated by the BOP20 Powerhead (BP20-PH) and is suitable for oils ranging from SAE 0W40 to 75W90.
Pump Stem Kit 20l
File Size: 1194 kb
File Type: pdf
Download File
Picture
Battery Operated Pump - Pump Stem Kit 20L
Designed and manufactured in Australia, the BOP60 ATF Pump Stem Kit comes with both the modular pump stem and an on-demand control nozzle with a 1.5m hose. Each Pump Stem has an extendable suction tube and a bung adaptor to suit the drum openings.  Multiple pump stems can be used with differing fluids to avoid cross-contamination. To function, the stem is operated by the BOP60 Powerhead (BP20-PH) and is suitable for all ATF fluids. 
*Pump stem kit does not include Powerhead or battery.

ps_bop60.pdf
File Size: 1613 kb
File Type: pdf
Download File
Picture
BOP Pump Stem KIT- 60L
There’s never been a smarter pump. Designed and made in Australia, the Macnaught BOP60 is a portable and rechargeable 18volt battery operated pump, designed to improve workshop efficiency and reduce fatigue with the flick of a switch. Simple but clever, the BOP60 powerhead can be transferred across multiple pump stems to reduce setup costs. The on-demand flow nozzle allows full control over fluid delivery with flow rates up to 3.5L/min.
ps_bop60_1_.pdf
File Size: 1613 kb
File Type: pdf
Download File
Picture
BOP60 Battery Operated Pump - Starter Kit 60L
The 20L Oil Transfer Pump is designed for dispensing most service fluids including engine, gear, transmission, hydraulic and some engine coolants from 20L - 25L drums. An extendable suction tube and one additional bung adaptor ensures that the expanding range of different size and types of drums are easily catered for. Delivery on the down-stroke makes this pump easy to use especially when the drum is low on fluid. An extra-long clear delivery hose gives easy identification of the fluid type and allows better reach into difficult areas.
20l Oil Pump
File Size: 193 kb
File Type: pdf
Download File
Picture
20L Oil Pump Premium With Hose & Non Drip Nozzle
Air-Operated Oil Pump Kit 1:1 ratio - 205L Drum type

  • 1:1 Ratio pumps offer a higher flow rate but limited in delivery distance from drum transfer over short distances 
  • Suitable for oils or anti-freeze up to SAE 80 viscosity
  • Output up to 40LPM viscosity dependent
  • Min/Max air pressure: 30/150psi, air inlet 1/4” BSP(F)
  • Pump outlet 1/2” BSP(F), pump inlet 1” BSP(F)
  • Wetted materials: steel, brass, aluminum, nitrile rubber, polyurethane and turcite
  • Note: Air lubricator supplied
  • Limited spare parts available
ps_l-arpd1.pdf
File Size: 166 kb
File Type: pdf
Download File
Picture
AIR OPERATED OIL PUMP 1:1
Air-Operated Oil Pump Kit 1:1 ratio - 205L stub type

  • 1:1 Ratio pumps offer a higher flow rate but limited in delivery distance from drum transfer over short distances 
  • Suitable for oils or anti-freeze up to SAE 80 viscosity
  • Output up to 40LPM, depending on viscosity
  • Min/Max air pressure: 30/150psi, air inlet 1/4” BSP(F)
  • Pump outlet 1/2” BSP(F), pump inlet 1” BSP(F)
  • Wetted materials: steel, brass, aluminum, nitrile rubber, polyurethane and turcite
  • Note: Air lubricator supplied
ps_l-arps1.pdf
File Size: 190 kb
File Type: pdf
Download File
Picture
AIR OPERATED OIL STUB PUMP 1:1
Air-Operated Oil Pump 3:1 ratio 205L - Drum type

  • 3:1 Ratio pumps compromise between delivery volume and distance giving less flow but for longer distances
  • Suitable for oils or anti-freeze up to SAE 130 viscosity
  • Output up to 14LPM viscosity dependent
  • Min/Max air pressure: 30/150psi, air inlet 1/4” BSP(F)
  • Pump outlet 1/2” BSP(F), pump inlet 1” BSP(F)
  • Wetted materials: steel, brass, aluminum, nitrile rubber, polyurethane and turcite
  • Note: Air lubricator supplied
  • Limited spare parts available
ps_l-arpd3.pdf
File Size: 310 kb
File Type: pdf
Download File
Picture
AIR OPERATED OIL DRUM PUMP 3:1
Air Operated Oil Bar Kit designed to dispense direct from 205L drums or tanks.

  • Suitable for oils and fluids up to SAE 80 viscosity
  • Delivery output up to 40LPM, depending on viscosity
  • Air inlet 1/4” BSP(F)/Fluid outlet 1/2” BSP(F)
  • Kit supplied with 1:1 ratio pump with bung adaptor, oil bar tap with fittings
  • 5L Oil measuring jug
  • Note: Air lubricator supplied

ps_l-arpd1-kit1.pdf
File Size: 211 kb
File Type: pdf
Download File
Picture
AIR OPERATED OIL BAR KIT 1:1
A challenge with pumping viscous oil with electric pumps is the duty cycle. This 240V Oil Transfer Pump is a gear pump that enables the continuous extraction of oil. With this pump you no longer have the interruptions experienced using alternative oil pumps. This pump is also fan cooled ensuring safer longer operation.
240v Oil Transfer Pump
File Size: 76 kb
File Type: pdf
Download File
Picture
240V OIL TRANSFER PUMP
Picture
20 LITRE HAND SPRING PUMP ASSY
im_spring_pump.pdf
File Size: 186 kb
File Type: pdf
Download File
Picture
20L ATF/Gear Oil Pump
The ATF/gear oil pump has been designed to dispense oil under spring pressure after the oil gun trigger has been pressed.
Air Operated Pump Kit designed to dispense directly from 205L drums or tanks.

  • This kit allows direct dispensing from drum (205L/54 gal drum)
  • Suitable for oils and fluids up to SAE 140 viscosity
  • Delivery output up to 14LPM viscosity dependant
  • Air inlet: 1/4" BSP(F)
  • Fluid outlet: 1/2" BSP(F)
  • Kit supplied with 3:1 ratio pump with bung adaptor, 3m x 12.5mm delivery hose, metered oil control gun with fitted rigid extension with non-drip nozzle and drum bung wrench (Aluminium 2"- 3/4")
  • Outlet Hose Length - 3m (10'ft) x 12.5mm 1/2"
  • Note: Air lubricator supplied
ps_l-arpd3-kit2.pdf
File Size: 487 kb
File Type: pdf
Download File
The BOP Battery Operated Pump Powerhead can be transferred across multiple pump stems to reduce setup costs (battery not included).
ps_bp20s-ola.pdf
File Size: 805 kb
File Type: pdf
Download File
Picture
BOP Battery Operated Pump Powerhead
Hand operated oil pump for most 20L drum sizes

  • 1.5m of PVC hose with anti-kink springs
  • Suitable for mineral oils up to SAE90 viscosity
  • 340mm pump length with suction tube extender
  • 2 additional drum thread adaptors included
  • Pump primes easily
  • Delivers on down stroke for easy operation
  • Nozzle holder with drain-back feature built into bung adaptor
ps_l-dp20j.pdf
File Size: 197 kb
File Type: pdf
Download File
Picture
HAND OPERATED OIL PUMP
Lever Action Barrel Pump suitable for lubricating oils and service fluids.

  • 500ml per stroke
  • Lever operated pump
  • Suitable fluids: diesel, kerosene, lubricating oils to SAE 90, service fluids
  • Telescopic suction tube 60 – 205L
  • Outlet tube
  • 1 1/2” & 2” Drum threads
  • Wetted materials: steel, aluminium, zinc, brass, NBR, viton
  • No spare parts available 
ps_l-lbp.pdf
File Size: 183 kb
File Type: pdf
Download File
Picture
LEVER ACTION BARREL PUMP
The C11-01 is a lever-action gear oil pump compatible with both 60L & 205L drums. The C11 oil pump can handle the tough jobs dispensing right through to gear oils viscosities. Provides up to 75ml per stroke. 1.8m hose and non-drip nozzle included. Optional CF strainer available for ATF & hydraulic oils.

  • Drum size: 60 & 205L
  • Delivers up to 75ml per stroke
  • 1.8m hose and non-drip nozzle included
  • Compatible fluids: Engine oil, gear oils up to SAE140, automatic transmission and hydraulic fluid
  • Wetted parts: Aluminium, steel, brass, Nitrile rubber and Teflon
ps_c11-01.pdf
File Size: 223 kb
File Type: pdf
Download File
Picture
LEVER ACTION GEAR OIL PUMP
The C7-01 hand operated oil pump is suitable for use with a wide range of mineral oils. It is ideal for pumping gear oils and transmission fluids up to SAE 140. The C7-01 is supplied with three bung adapters to suit various containers from 15-25L. The C7-01 also features a built in nozzle holder, 1.8m delivery hose, delivery spout and a manual non-drip nozzle complete with manual shut off.
im_c7.pdf
File Size: 280 kb
File Type: pdf
Download File
Picture
MULTI-PURPOSE GEAR OIL PUMP
The C7-51 hand operated oil pump with ATF strainer is suitable for use with a wide range of mineral oils. It is ideal for pumping gear oils and transmission fluids up to SAE 140. The C7-51 is supplied with three bung adapters to suit various containers from 15-25L. The C7-51 also features a built in nozzle holder, 1.8m delivery hose, delivery spout and a manual non-drip nozzle complete with manual shut off.
im_c7_1_.pdf
File Size: 280 kb
File Type: pdf
Download File
Picture
MULTI-PURPOSE GEAR OIL PUMP, INCL ATF STRAINER
The C7N-01 multi-purpose hand operated oil pump is suitable for use with a wide range of mineral oils. It is ideal for pumping gear oils and transmission fluids up to SAE 140. The C7N-01 is supplied with three bung adapters to suit various containers from 15-25L.
im_c7_2_.pdf
File Size: 280 kb
File Type: pdf
Download File
Picture
MULTI-PURPOSE GEAR OIL PUMP, WITH DELIVERY SPOUT
A classic Macnaught hand pump, the  MULTI- PURPOSE LEVEL DRUM PUMP is the ideal pump for transferring a wide variety of fluids such as diesel fuel, lubricating oils and an extensive range of non-corrosive fluids and chemicals.

This pump is supplied complete with a 1.8m delivery hose, telescopic suction tube and is suitable for 60 – 205L drums.
This equipment is fully repairable to provide a much longer service life.

ps_a2h_1_.pdf
File Size: 248 kb
File Type: pdf
Download File
The C16-01 suction gun (500ml) is used to transfer most oils, new or used, in and out of enclosed gearboxes, differentials, transfer cases and engine sumps. The C16-01 is also great for in-field use for top-ups and extraction. Can handle oils up to SAE140 viscosity.
im_c16.pdf
File Size: 128 kb
File Type: pdf
Download File
The heavier-duty R-SERIES pump packages offers higher flow rate for direct drum dispensing (includes HG20R-01 gun).
Air Operated Pump Kit designed to dispense direct from 205L drums or tanks.

  • This kit allows direct dispensing from drum (205L/54 gal drum)
  • Suitable for oils and fluids up to SAE 140 viscosity
  • Delivery output up to 14LPM, dependant on viscosity
  • Kit supplied with 3:1 ratio pump with bung adaptor, 3m x 12.5mm delivery hose, Metered oil control gun, TR205-205L Drum Trolley and Drum bung wrench (Aluminium - 2"-3/4")
  • Outlet Hose Length - 3m (10'ft) x 12.5mm 1/2"
  • Note: Air lubricator supplied

ps_l-arpt-1.pdf
File Size: 1867 kb
File Type: pdf
Download File
Picture
L-ARPD3 WITH HOSE, DIGITAL OIL GUN & 205L DRUM TROLLEY
Air Operated Pump Kit designed to dispense directly from 205L drums or tanks.

  • This kit allows direct dispensing from drum (205L/54 gal drum)
  • Suitable for oils and fluids up to SAE 140 viscosity
  • Delivery output up to 14LPM, dependant on viscosity
  • Kit supplied with 3:1 ratio pump with bung adaptor, 3m x 12.5mm delivery hose,  Metered oil control gun, TR205-205L Drum Trolley, Retracta Oil Reel 1/2" x 10m and Drum bung wrench (Aluminium - 2"- 3/4")
  • Outlet Hose Length - 3m (10'ft) x 12.5mm
ps_l-arptr-1.pdf
File Size: 413 kb
File Type: pdf
Download File
Picture
L-ARPD3 WITH RETRACTA OIL REEL DIGITAL OIL GUN & 205L DRUM TROLLEY
The heavier-duty R-SERIES pump packages offers higher flow rate for direct drum dispensing (includes HG20R-01 gun).

  • Estimated max flow rates 12L/min using SAE10 oil
  • Suitable for oils to SAE140, coolants, kerosene, diesel
  • 3:1 ratio air-operated drum oil pump (R300T-01)
  • 3m x 3/4" i.d. oil delivery hose