Tyre Inflators
Additional fees apply if freight is required outside of Tasmania.
View Spec Sheet:
| TDR 2000 Spec Sheet |
TDR 2000 Tyre Inflator - Part No. #TDR10.2000
Inlet size 1/4" BSP (F)
Reader unit Magnified sight glass
Chuck type Hold on
Chuck style Dual angle
Scale 0-960 kPa (0-138 p.s.i.)
Hose length 500 mm
Advised application Industrial
Weight 1.2 kg
- Precision diecast body
- Pressed steel operating lever
- Stamped with serial number & supplied with calibration certificate
- Colour co-ordinated bumper and face plate
- Manufactured in England
Inlet size 1/4" BSP (F)
Reader unit Magnified sight glass
Chuck type Hold on
Chuck style Dual angle
Scale 0-960 kPa (0-138 p.s.i.)
Hose length 500 mm
Advised application Industrial
Weight 1.2 kg
View Spec Sheet:
| Bar Style Inflator |
High Pressure Aviation Tyre Inflator - Part No. #02.0100
Inlet size 1/4" BSP
Reader unit Magnified sight glass
Chuck type Aircraft
Chuck style Screw on
Scale 0-21 Bar (0-300 p.s.i.)
Hose length 2 m
Advised application Aircraft
Weight 1.6 kg
- Suited for most aircraft applications
- Ability to be calibrated
- Calibration certificate supplied
- Comes with 8V1 screw on connector (CO9P03)
Inlet size 1/4" BSP
Reader unit Magnified sight glass
Chuck type Aircraft
Chuck style Screw on
Scale 0-21 Bar (0-300 p.s.i.)
Hose length 2 m
Advised application Aircraft
Weight 1.6 kg
View Spec Sheet:
| Dial Tyre Inflator |
Dial Tyre Inflator
Reader Unit 50 mm dial
Chuck Type Hold on
Chuck Style Dual angle
Scale 1-1000 kPa (0-150 p.s.i.)
Hose Length 350 mm
Advised Application Industrial
- 50 mm dial gauge with rubber impact protector
- UV stabilised hose
- Inflate/deflate control
Reader Unit 50 mm dial
Chuck Type Hold on
Chuck Style Dual angle
Scale 1-1000 kPa (0-150 p.s.i.)
Hose Length 350 mm
Advised Application Industrial